The "Original" York - Rakes and More!

A New York State Original!

The company started in 1921 as a manufacturer of horse drawn road maintainers. The original York Stone Rake had the unique feature of a rake to finish off the road surface. It is this unique feature that has made the term York Rake synonymous with landscape rakes the world over -- after all: They invented it!

"BASIC" Series Light/Medium Duty Rakes

"MT" Series Tow-Type Rakes for Lawn Tractors, ATV's, UTV's

MT24
4-Foot Width

The Model MT24 is ideal for light duty maintenance and landscaping jobs with three(3) working positions. The unit is equipped with 10 x 2.75" semi-pneumatic tires. Teeth are 1/4" x 1" x 22" heat-treated alloy steel.

MT25, MT26
5 & 6-Foot Widths

5' and 6' Width units are equipped with heavier undercarriage and 10 x 3" semi-pneumatic tires. Five(5) working positions. Teeth are 1/4" x 1" x 22" heat-treated alloy steel.

"MR" Series for Tractors up to 30 Horsepower

Model MR2
4,5 & 6 Foot Widths

The Model MR2 is designed for use with tractors equipped with category "0" or "1" 3-point hitches. Teeth are 1/4" x 1" x 22" heat-treated alloy steel. 10 x 2.75" semi-pneumatic caster wheels are optional.

Model MR3
6,7 & 8 Foot Widths

The MR3 fits tractors with category "1" three(3) point hitch and is available in 6,7 and 8-foot widths. Teeth are a hefty 5/16" x 1" x 28" heat-treated alloy steel. 10 x 3" semi-pneumatic caster wheels are optional.

Standard and Heavy Duty Rakes

Tow Behind

TA1 SERIES

The Model TA1 adds more workability to riding tractors, ATV's & UTV's. Designed for lawn and garden riding tractors, ATV's & UTV's of lower horse power capacities. This four-foot Trailer-Type Rake may be drawn in three positions: straight across, or angled to discharge material either to right or left. Also available w 1-7/8" ball (TA14"B").

TA2 SERIES

The Model TA2 offers the most efficient soil-working method. Designed specifically for riding tractors of 10 H.P. and up, the Model TA2 Rake is a combination that makes short work of tedious soil-working jobs. The Model TA2 enables one man to cover large areas quickly, at less cost than with other methods used today. Also available with 1-7/8" ball (TA2"B")

Three-Point Hitch

RS SERIES

The York Model RS, combines scarifying, blading, raking...removes stones and debris...spreads topsoil...also pulverizes and mulches. Designed for use by landscape and seeding contractors, nurseries, park maintenance departments, estates, golf courses, cemeteries, beaches, schools, resorts and recreational areas.

RW SERIES

The Model RW Landscape Rake is designed and built for a new breed of grounds maintenance tractors in the 20 to 35 horsepower range. Rugged welded steel construction and a choice of a 6, 7 or 8 foot working width make this unit a perfect work-mate with any tractor to handle a wide variety of soil-working jobs.

RI SERIES

The Model RI is available in two versions, Landscape or Heavy. The Landscape version uses 1" teeth and 1" spacing for a finer finish. The Heavy uses 1-1/4" teeth and 1-1/2" spacing for a coarser finish. Optional hydraulic angle and interchangeable rake sections make this model the favorite among landscape and construction pros.

Power Rakes

Model YPR 3-Point

3 PT. Hitch, PTO Drive Power Rake, Hydraulic Angle. Available in 6', 7' and 8' widths.

Model YPRC 3-Point

Compact 5', Category "1" 3 PT. Hitch, 540 PTO Driven, Hydraulic or Manual Angle, Power Rake.

Model YPRSS

Skid Steer Mounted Power Rake, Hyd. Angle with 8 pin Joystick Control Connector. Available in 6',7', and 8' widths.

Rotary Brooms

Walk-Behind

Model YBWB

Model YBWB3 Walk Behind 3' Broom Briggs & Stratton Engine 5.5 H.P.

Three-Point Hitch

Model YB24

The Model YB24 York broom is a 3 point hitch mount, pto driven, rear mount broom for compact utility tractors from approximately 17-35 hp. (For larger tractors 35 hp and larger see our index for the YB32 model).

Model YB32

Mounts to standard Category I or II three-point hitch tractor w/ PTO. Equipped with a reversible gearbox that allows brush rotation to be reversed so operators can sweep in either travel direction. Available in 6-, 7- and 8-feet widths

Skid Steer Mount

Model SSAB24

Model SSAB Skid Steer mounted, angle broom, Hydraulic Drive, 24" Diameter Broom.

Model SSAB32

Model SSAB Skid Steer mounted, angle broom, Hydraulic Drive, 32" Diameter Broom.

Model SSPU

Model SSPU Skid Steer mounted, 5' or 6' pick up broom, Hydraulic Drive