Brush Mulchers

Feller Bunchers

Flail Mowers

Generators

Rotary Brush Cutters

Screw Splitters

Skid Steer Boom Mower

Stump Planers

Tile Drainage Plows

Tree Puller

Tree Saw

Tree Shearer

Tree Spade

Trenchers

AUGER DRIVES

OWNER OPERATOR SERIES

CONTRACTOR SERIES

RC442 - 2" Round Drive

  • 6-14 Rec. GPM to 18 Max. GPM 
  • Gear drive
  • 1″ pivot pins
  • Standard frame
  • Skidsteer size: 1500-5000 lbs
  •  Excavator size: 2000-4000 lbs
  • 3.18: 1 gear ratio
  • 98 lbs. shipping wt. (drive only)
  • Adapter code: A

RC582 - 2" Round Drive

  • 6-24 Rec. GPM to 25 Max. GPM
  • Planetary drive
  • 1″ pivot pins
  • Standard frame
  • Skidsteer size: 1500 – 6000 lbs
  • Excavator size: 2000 – 6000 lbs
  • 3.6: 1 gear ratio
  • 124 lbs. shipping wt. (drive only)
  • Adapter code: B

RC586 - 2" Round Drive

  • 10-24 Rec. GPM to 25 Max. GPM
  • Heavy duty planetary drive
  • .5″ pivot pins with brass bushings
  • Heavy duty frame
  • Skidsteer size: 2000-8,000 lbs
  • Excavator size: 3000-20,000 lbs
  • 6: 1 gear ratio
  • 158 lbs. shipping weight (drive)
  • Adapter code: D

RC780 - 2" Round Drive

  • 20-40 Rec. GPM to 45 Max. GPM
  • Heavy duty planetary drive
  • 1.5″ pivot pins with brass bushings
  • Heavy duty frame
  • Skidsteer size: 3000-12,000 lbs
  • Excavator size: 4000-30,000 lbs
  • 5: 1 gear ratio
  • 40 lbs. shipping weight (drive)
  • Adapter code: D 

BRUSH MULCHERS

TRACTOR-MOUNTED MODELS
MP300-SERIES (25-55 HP)

MP348

  • 60″ Path Width
  • 48″ Rotor Width
  • 25 HP Engine Minimum (50
  • HP Maximum) 40 HP PTO Maximum
  • Level Cutting Depth
  • 2″ Rotor Shaft
  • 15″ Rotor Diameter (tool tips)
  • 230 lb. Rotor (with tools)
  • CAT 1 3PH
  • Quick Hitch Compatible: No
  • 540 RPM Drive Speed
  • 1 3/8″ Gearbox Spline Size
  • 1 3/8″ Tractor End Spline Size
  • Slip Clutch Protection
  • 1050 lb.
  • H3000 Speed Teeth* 
  • 60 Teeth

MP360

  • 72″ Path Width
  • 60″ Rotor Width
  • 30 HP Engine Minimum (55
  • HP Maximum) 45 HP PTO Maximum
  • Level Cutting Depth
  • 2″ Rotor Shaft
  • 15″ Rotor Diameter (tool lips)
  • 315 lb. Rotor (with tools)
  • CAT 1 3PH
  • Quick Hitch Compatible: No
  • 540 RPM Drive Speed
  • 1 3/8″ Gearbox Spline Size
  • 1 3/8″Tractor End Spline Size
  • Slip Clutch Protection
  • 1200 lb.
  • H3000 Speed Teeth*
  • 74 Teeth

TRACTOR-MOUNTED MODELS
MP500-SERIES (45-125 HP)

MP560

  • 75″ Path Width
  • 60″ Rotor Width
  • 45 HP Engine Minimum (75 HP Max.)
  • 65 HP PTO Maximum
  • 1.5″ Above to 1″ Below Grade Cutting Depth
  • Back door hydraulically controlled from the cab
    gives control of the mulching action
  • 2″ Rotor Shaft
  • 15″ Rotor Diameter (tool tips)
  • 575 lb. Rotor (with tools)
  • CAT2 3PH
  • Quick Hitch Compatible: No
  • 540 RPM Drive Speed
  • 1 3/8″ Gearbox Spline Size
  • 1 3/8″Tractor End Spline Size
  • Slip Clutch Protection
  • 2145 lb.
  • 126 Teeth
  • 1 hydraulic remote required
  • P5000 Planer Teeth* (Standard)
  • R5000 Ripper Teeth* (Can be switched out by customer only)

MP572

  • 87″ Path Width
  • 72″ Rotor Width
  • 50 HP Engine Minimum (125 HP Maximum)
  • 115 HP PTO Maximum
  • 1.5″ Above to 1″ Below Grade Cutting Depth
  • 2″ Rotor Shaft
  • 15″ Rotor Diameter (tool tips)
  • 700 lb. Rotor (with tools)
  • CAT2 3PH<br>
  • Quick Hitch Compatible: No
  • 1000 RMP Drive Speed
  • Optional 540 RPM Drive Speed (Max 110 HP)
  • 1 3/8″ Gearbox Spline Size
  • 1 3/8″Tractor End Spline Size
  • Slip Clutch Protection
  • 2500 lb.
  • 160Teeth
  • 2 hydraulic remotes required
  • P5000 Planer Teeth* (Standard)
  • R5000 Ripper Teeth* (Can be switched out by customer only)

SKID STEER-MOUNTED BRUSH MULCHERS

MS-500 SERIES

MS548

  • 62″ Path Width
  • 48″ Rotor Width
  • 4000Ib min carrier weight
  • 1.5″ Above to 1″ Below Grade Cutting Depth
  • Fixed Holder Style
  • 15″ Rotor Diameter (tool tips)
  • 480 lb Rotor (with tools)
  • Built-In Relief System Protection
  • Large PSI pressure gauge for maintaining optimal flow
  • 1491 lb.
  • 104 Teeth
  • P5000 Planer Teeth* (Standard)
  • R5000 Ripper Teeth* (Can be switched out by customer only)

MS560

  • 75″ Path Width
  • 60″ Rotor Width
  • 5500Ib min carrier weight
  • 1.5″ Above to 1″ Below Grade Cutting Depth
  • Fixed Holder Style
  • 15″ Rotor Diameter (tool tips)
  • 575 lb. Rotor (with tools)
  • Built-In Relief Protection
  • Large PSI pressure gauge for maintaining optimal flow
  • 2115 lb.
  • 126 Teeth
  • P5000 Planer Teeth* (Standard)
  • R5000 Ripper Teeth* (Can be switched out by customer only)

MS572

  • 87” Path Width
  • 72″ Rotor Width
  • 6000lb min carrier weight
  • 1.5″ Above to 1″ Below Grade Cutting Depth
  • Fixed Holder Style
  • 15″ Rotor Diameter (tool tips)
  • 700 lb. Rotor (with tools)
  • Built-In Relief Protection
  • Large PSI pressure gauge for maintaining optimal flow
  • 2266 lb.
  • 160 Teeth
  • P5000 Planer Teeth (Standard)
  • R5000 Ripper Teeth (Can be switched out by customer only)

MS900 & MS1100 SERIES

MS960

  • 75″ Path Width
  • 60″ Rotor Width
  • 7,000Ib min carrier weight
  • 2.25″ above grade to 2.5″ below grade
  • Fixed Holder Style
  • 18.5″ Rotor Diameter (tool tips)
  • 860 lb. Rotor (with tools)
  • Built-In Relief Protection
  • Large PSI pressure gauge for maintaining optimal flow
  • Couplers NOT Included
  • 2,724 lb.
  • 38 Teeth
  • R9000 Ripper Teeth (Standard)
  • P9000 Planer Teeth (Can be switched out by customer only)

MS972

  • 84″ Path Width
  • 72″ Rotor Width
  • 7,500Ib min carrier weight
  • 2.25″ above grade to 2.5″ below grade
  • Fixed Holder Style
  • 18.5″ Rotor Diameter (tool tips)
  • 1,105 lb. Rotor (with tools)
  • Built-In Relief Protection
  • Large PSI pressure gauge for maintaining optimal flow
  • Couplers NOT Included
  • 3115 lb.
  • 43 Teeth
  • R9000 Ripper Teeth (Standard)
  • P9000 Planer Teeth (Can be switched out by customer only)

MS1160

  • 75″ Path Width
  • 60″ Rotor Width
  • 7,000lb min carrier weight
  • 1″ above grade to 3″ below grade
  • Fixed Holder Style
  • 19.3″ Rotor Diameter (tool tips)
  • 860 lb. Rotor (with tools)
  • Built-In Relief Protection
  • Large PSI pressure gauge for maintaining optimal flow
  • Couplers NOT Included
  • 2,800 lb.
  • 31 Teeth
  • R 11000 Sharpenable Planer Teeth

ROTARY BRUSH CUTTERS

TRACTOR-MOUNT MODELS

CP560

  • Open Front with Push Bar
  • Chain Curtain Protection on
  • Back 70″ Path Width
  • 60″ Cutting Width
  • Cuts as low as 2.5″
  • 4 Blades
  • 52 Slashes per Second
  • CAT2 3PH
  • Quick Hitch Compatible: No
  • 75 HP Engine Maximum
  • 65 HP PTO Maximum
  • 4000 lb. Minimum Carrier Weight
  • 2-Disk Clutch System Protection
  • 1/4″ Steel Deck Structure
  • 1600 lbs.

CP572

  • Open Front with Push Bar
  • Chain Curtain Protection on Back
  • 82″ Path Width
  • 72″ Cutting Width
  • Cuts as low as 2.5″
  • 4 Blades
  • 52 Slashes per Second
  • CAT2 3PH
  • Quick Hitch Compatible: No
  • 85 HP Engine Maximum
  • 75 HP PTO Maximum
  • 5000 lb. Minimum Carrier Weight 
  • 4-Disk Clutch System Protection
  • 1 /4″ Steel Deck Structure
  • 1900 lbs.

SKID STEER MOUNT MODELS

CF300-SERIES

CF500-SERIES

CF360

  • Chain Curtain Protection on Front and Back
  • 70″ Path Width
  • 60″ Cutting Width
  • Cuts as low as 2.5″
  • 2 Blades
  • Universal Skid-Steer Plate Attachment
  • Hoses & Couplers Included
    (M450 Motor)
  • Hoses Included
  • Couplers NOT Included (M550 & M650 Motor)
  • 4000 lb. Minimum Carrier Wt.
  • Built In Hydraulic System Protection
  • 1/4″ Steel Deck Structure
  • 1342 lbs.
  • Motor Options: M450,M550,M650

CF372

  • Chain Curtain Protection on Front and Back
  • 82″ Path Width
  • 72″ Cutting Width
  • Cuts as low as 2.5″
  • 2 Blades
  • Universal Skid-Steer Plate Attachment
  • Hoses & Couplers Included
    (M450 Motor)
  • Hoses Included
  • Couplers NOT Included (M550 & M650 Motor)
  • 4,500 lb. Minimum Carrier Wt.
  • Built In Hydraulic System Protection
  • 1/4″ Steel Deck Structure
  • 1390 lbs.
  • Motor Options: M450, M550,M650

CF560

  • Open Front with Push Bar
  • Chain Curtain Protection on
  • Back 70″ Path Width
  • 60″ Cutting Width
  • Cuts as low as 2.5″
  • 4 Blades
  • Universal Skid-Steer Plate Attachment
  • Hoses & Couplers Included
    (M450 Motor)
  • Hoses Included
  • Couplers NOT Included (M550 & M650 Motor)
  • 4500 lb. Minimum Carrier Weight
  • Built In Hydraulic System Protection
  • 1/4″ Steel Deck Structure
  • 1540 lbs.
  • Motor Options: M450, M550 M650

CF572

  • Open Front with Push Bar
  • Chain Curtain Protection on Back
  • 82″ Path Width
  • 72″ Cutting Width
  • Cuts as low as 2.5″
  • 4 Blades
  • Universal Skid-Steer Plate Attachment
  • Hoses & Couplers Included
    (M450 Motor)
  • Hoses Included
  • Couplers NOT Included (M550 & M650 Motors)
  • 5000 lb. Minimum Carrier Weight
  • Built In Hydraulic System Protection
  • 1 /4″ Steel Deck Structure
  • 1570 lbs.
  • Motor Options: M450, M550,M650

SKID STEER-MOUNTED BOOM MOWERS

SWA540

  • 4,500 lbs. Minimum Carrier Weight
  • 6 ft. Reach (when flat)
  • 48″ Head (38 flail clusters)
  • Single Arm Boom
  • F2000 Flail Teeth (F3000 Teeth Optional)
  • 1,775 lbs.

SWA550

  • 5,000 lbs. Minimum Carrier Weight
  • 7 .5 ft Reach (when flat)
  • 60″ Head (48 flail clusters)
  • Single Arm Boom
  • F2000 Flail Teeth (F3000 Teeth Optional) 
  • 1,900 lbs. 

SWA560

  • 5,500 lbs. Minimum Carrier Weight
  • 10 ft Reach (when flat)
  • 60″ Head (48 flail clusters)
  • Single Arm Boom
  • F2000 Flail Teeth (F3000 Teeth Optional)
  • 1,750 lbs.

SWF560

  • 6,000 lbs. Minimum Carrier Weight
  • 10 ft Reach (when flat)
  • 48″ Head (38 flail clusters)
  • Boom & Stick
  • F2000 Flail Teeth (F3000 Teeth Optional)
  • 1,650 lbs.

SWF580

  • 8,000 lbs. Minimum Carrier Weight
  • 14 ft Reach (when flat)
  • 48″ Head (38 flail clusters)
  • Boom & Stick
  • F2000 Flail Teeth (F3000 Teeth Optional)
  • 1,750 lbs.

SWA750

  • 8,000 lbs. Minimum Carrier Weight
  • 7 ft Reach (when flat)
  • 42″ Head (3 blades)
  • Single Arm Boom
  • Rotary Cutter Blades (CXC542)
  • 2,050 lbs.

SKID STEER-MOUNTED FELLER BUNCHERS

MODEL FBS72 FELLLER BUNCHER

  • Skidsteer Mounted
  • Fixed Horizontal Blade
  • Universal Skidsteer Adaptor
  • 25 to 60 gpm motor
  • 4000 PSI
  • Requires 12 V Electric
  • Four 12V positive signals required
  • Wire Supplied to AUX on boom
  • Hoses Included
  • Couplers NOT Included
  • 52″ Diameter Blade
  • 20″ Max Cut
  • 36″Throat Opening
  • Throat Opening at teeth: 36″
  • 1″ Steel Blade/ 1 5/8″ Cut Thickness
  • 2500Ibs
  • 4 Edges Per Tooth
  • 18 Teeth
  • B8000 Beaver Teeth Optional
  • Hand-Held Contol D004956 -If you don’t have AUX, we have a wired hand-held control that connects to male AUX with a 16ft wire

PTO GENERATORS

Why Choose a PTO Generator?

When the power goes out, a Baumalight PTO generator offers a high-quality, high-capacity and portable power plant – right in your own backyard. Now you can take power wherever you need it: in-field repairs, construction on a remote part of your property, or even grain drying without a utility connection. Simply plug in and power up.

TX-SERIES GENERATORS 7kW-31kW (2 Pole)

With the Baumalight TX series of PTO generators, power is as close by as your tractor. With one less engine to maintain on your property, the TX series of portable generators gives you the advantage of using your reliable tractor during an emergency situation or simply for additional power when required. Designed to back up small farms and estates like yours, the TX PTO generators feature simple connections and controls that provide quick and easy access to power when you need it. The TX series of PTO generators are suited to tractors from 10 hp to 50 hp and provide backup or remote power from 7 Kilowatts to 31 Kilowatts.
In-field breakdowns can happen anywhere and at the worst time. Paired with a portable welder, TX PTO generators allow you to take power to where you need it the most, making them a perfect repair partner.

CHECK OUT THESE FEATURES

TX-SERIES TIRES
DRIP-PROOF DERSIGN
OPTIONAL 3-POINT HITCH MOUNT
VOLTAGE METER
WELDER RECEPTACLE
TWO-YEAR WARRANTY

NEED MORE INFO? CLICK ON A MODEL BELOW:

TX7

TX12

TX18

TX25

TX31

KR-SERIES GENERATORS 30kW-65kW (4 Pole)

Our newest addition to our line of PTO generators, the KR series generators are designed to fit tractors from 45 to 97 horsepower and support power requirements from 30 kilowatts to 65 kilowatts. The KR model’s generator assembly is made in Canada and the main components are made in Europe. When the unexpected happens, you can rely on the trusted combination of your tractor and your KR generator to get you back up and running. With one less engine to maintain, a PTO generator is an effective, reliable backup power source for your smaller appliances and large equipment motors on your farm. The KR series is a 4-pole copper winding generator that features a brushless design for less maintenance, automatic voltage regulation and DisplayMaster1, Baumalight’s own at a glance performance monitor.

BRUSHLESS DDESIGN
FULL LOAD CONNECTOR
SPEED INDICATOR LIGHYS
50-AMP WELDER RECEPTACLE
POWDER-COATED TRAILERS
HIGH MOMENTARYSURGE

KR-MODEL SPECIFICATIONS

NEED MORE INFO? CLICK ON A MODEL BELOW:

KR30

KR44

KR52

KR65

QC-SERIES GENERATORS 12kW-105kW (4 Pole)

SINGLE PHASE- 20/240, THREE PHASE- 120/240, 120/208, 120/240V, 480V

Add Your Heading Text Here

120/240 Models

QC12

QC19

QC30

QC45

QC55

QC65

QC80

QC100

208 Models

QC30-2

Q45-2

QC68-2

QC105-2

240 Models

QC30-3

Q45-3

QC68-3

QC105-3

277/480 Models

QC30-4

Q45-4

QC68-4

QC105-4

CHECK OUT THESE FEATURES

TX-SERIES TIRES
DRIP-PROOF DERSIGN
OPTIONAL 3-POINT HITCH MOUNT
VOLTAGE METER
WELDER RECEPTACLE
TWO-YEAR WARRANTY

STUMP GRINDERS

TRACTOR-MOUNT STUMP GRINDER MODELS

1P24*

  • 20-45 Recommended HP
  • 50 Maximum Engine HP
  • 40 Maximum PTO HP
  • 24″ Rotor Size
  • 540 RPM Cutting Wheel Speed
  • 10″ Cutting Height – Above Ground 6″ Cutting Depth – Below Ground
  • 5″ Maximum Cutting Depth – Per Pass 
  • 22″ Maximum Horizontal Cut
  • 0° Swing Arc
  • 803 Ft.-Lbs. Hub Torque
  • Shear bolt Over Torque Protection
  • Cat I Hitch
  • Quick Hitch Compatible: Yes
  • Slip Clutch PTO Shaft
  • Remote not required
  • 12 Volt DC Not Required
  • 540 Input Speed
  • 350 Lbs Unit Weight (Shipping)
  • 48″ Width (Shipping)
  • 48″ Length (Shipping)
  • Replacement Teeth: S1000 Teeth*
  • 34 Teeth

1P24

3P24

  • 25-55 Recommended HP 65
  • Maximum Engine HP
  • 55 Maximum PTO HP
  • 5-20 Hydraulic GPM
  • 24″ Rotor Size
  • 810 RPM Cutting Wheel Speed
  • 18″ Cutting Height – Above Ground 8″ Cutting Depth – Below Ground
  • 6″ Maximum Cutting Depth – Per Pass 
  • 22″ Maximum Horizontal Cut
  • 65° Swing Arc
  • 803 Ft.-Lbs. Hub Torque
  • Slip Clutch Over Torque Protection
  • Cat I or II Hitch
  • Quick Hitch Compatible: No
  • 2 Remotes Required – Hydraulic**
  • 12 Volt DC Not Required
  • 540 Input Speed
  • 624 Lbs Unit Weight (Shipping)
  • 42″ Width (Shipping)
  • 49″ Length (Shipping)
  • Replacement Teeth: S1000 Teeth*
  • 34 Teeth

3P24

3P34

  • 45-80 Recommended HP
  • 85 Maximum Engine HP
  • 75 Maximum PTO
  • 15-20 Hydraulic GPM
  • 34″ Rotor Size
  • 810 RPM Cutting Wheel Speed
  • 25″ Cutting Height – Above Ground
  • 14″ Cutting Depth -Below Ground
  • 9″ Maximum Cutting Depth – Per Pass
  • 32″ Maximum Horizontal Cut
  • 65° Swing Arc
  • 803 Ft.-Lbs. Hub Torque
  • Slip Clutch Over Torque Protection
  • Cat II Hitch
  • Quick Hitch Compatible: No
  • 2 Remotes Required – Hydraulic**
  • 12 Volt DC Not Required
  • 540 Input Speed
  • 1231 Lbs Unit Weight (Shipping)
  • 48″ Width (Shipping)
  • 54″ Length (Shipping)
  • Replacement Teeth: S1000 Teeth*
  • 54 Teeth

3P34

3P40

  • 60-120 Recommended HP
  • 125 Maximum Engine HP
  • 115 Maximum PTO HP
  • 5-20 Hydraulic GPM
  • 34″ Rotor Size
  • 1000 RPM Cutting Wheel Speed
  • 25″ Cutting Height – Above Ground
  • 14″ Cutting Depth – Below Ground
  • 9″ Maximum Cutting Depth
  • 32″ Maximum Horizontal Cut
  • 65° Swing Arc
  • 1050 Ft.-Lbs. Hub Torque
  • Slip Clutch Over Torque Protection
  • Cat II Hitch
  • Quick Hitch Compatible: No
  • 2 Remotes Required – Hydraulic**
  • 12 Volt DC Not Required
  • 1,000 Input Speed
  • 1280 Lbs Unit Weight (Shipping)
  • 48″Width (Shipping)
  • 54″ Length (Shipping)
  • Replacement Teeth: S1000 Teeth*
  • 54 Teeth


3P40

*Tractor must have hydrostatic drive On subcompact tractors with short arms, the D005735 Extension Kit is required

TRACTOR STUMP CUTTING TIMES BASED ON 30 STUMP (ESTIMATED)

SKID STEER/COMPACT TRACK LOADER STUMP GRINDERS

S24

  • 30-80 Recommended HP size
  • Check GPM & PSI for Maximum Carrier Size
  • Roller Vane Motor
  • Check Stump Cutting Size Chart for Hydraulic GPM
  • 24″ Rotor Size
  • Cutting Wheel Speed Depends on GPM
  • No limit Cutting Height – Above Ground
  • 10″ Cutting Depth – Below Ground
  • 6″ Maximum Cutting Depth – Per Pass
  • 22″ Maximum Horizontal Cut
  • 80° Swing Arc
  • 250 Ft.-Lbs. Hub Torque
  • Relieve valve Over Torque Protection
  • Quick Attach Hitch
  • 1 Remote Required – Hydraulic
  • Requires 12 Volt DC
  • 920 Lbs Unit Weight (Shipping)
  • Replacement Teeth: S 1000*
  • 34 Teeth
  • Includes adapter
  • Hoses included, couplers NOT included. Deduct $100 if ordered with AUX.

S24

S28

  • 50-120 Recommended HP size
  • Check GPM & PSI for Maximum Carrier Size
  • Roller Vane Motor
  • Check Stump Cutting Size Chart for Hydraulic GPM
  • 24″ Rotor Size
  • Cutting Wheel Speed Depends on GPM
  • No limit Cutting Height – Above Ground
  • 10″ Cutting Depth – Below Ground
  • 6″ Maximum Cutting Depth – Per Pass
  • 22″ Maximum Horizontal Cut
  • 80° Swing Arc
  • 803 Ft.-Lbs. Hub Torque
  • Relieve valve Over Torque Protection
  • Quick Attach Hitch
  • 1 Remote Required -Hydraulic
  • Requires 12 Volt DC
  • 995 Lbs Unit Weight (Shipping)
  • Replacement Teeth: S1000*
  • 34 Teeth
  • Includes adapter
  • Hoses included, couplers NOT included. Deduct $100 if ordered with AUX.

S28

S40

  • 50-130 Recommended HP size
  • Check GPM & PSI for Maximum Carrier Size 
  • High Efficiency Bent Axis Piston
  • Check Stump Cutting Size Chart for Hydraulic GPM
  • 24″ Rotor Size
  • Cutting Wheel Speed Depends on GPM
  • No limit Cutting Height – Above Ground
  • 24″ Cutting Depth – Below Ground
  • 2″ Maximum Cutting Depth – Per Pass
  • 22″ Maximum Horizontal Cut
  • 85° Swing Arc (cuts both ways)
  • Relieve valve Over Torque Protection
  • Quick Attach Hitch
  • 1 Remote Required – Hydraulic
  • Requires 12 Volt DC
  • 1,200 Lbs Unit Weight (Shipping)
  • Replacement Teeth: H3000 high speed teeth
  • 20 Teeth
  • Includes adapter
  • Hoses included, couplers NOT included. Deduct $100 if ordered with AUX.

S40

SKID STEER STUMP CUTTING TIMES BASED ON 24" STUMP (ESTIMATED)

SCREW SPLITTER/STUMP PLANER COMBO

RSS380

  • Carrier weight for planer: 5000 lbs. (Max)
  • Carrier weight for splitter: 7000 lbs. (Max) 
  • Recommended GPM: 20-40
  • Max GPM:45
  • Recommended PSI: 2500-3000
  • Max PSI: 3500
  • 2″ Hex Planetary Drive
  • Hoses Included*

RSS380

RSS580

  • Carrier weight for planer: 6000 lbs. (Max)
  • Carrier weight for splitter: 7000 lbs. (Max)
  • Recommended GPM: 20-40 
  • Max GPM:45
  • Recommended PSI: 2500-3000
  • Max PSI: 3500
  • 2″ Hex Planetary Drive
  • Hoses Included* 

RSS580

RSS780

  • Carrier weight for planer: 10,000 lbs. (Max)
  • Carrier weight for splitter: 12,000 lbs.(Max) 
  • Recommended GPM: 20-55
  • Max GPM:65
  • Recommended PSI: 2500-4500
  • Max PSI: 5000
  • Hoses Included* 
  • Case drain necessary

RSS780

TREE SAWS

TRACTOR-MOUNTED TREE SAWS

DPH530

  • 50 Hp Maximum Engine
  • 40 Hp Maximum PTO
  • CAT 1 3-point hitch
  • Quick Hitch Compatible: Yes
  • Fixed Horizontal Blade
  • 540 Drive Shaft Slip clutch Gearbox protection
  • 30″ Blade Diameter (9.5″ Max Cut)
  • AR400 Blade Material
  • 3/4″ Cut Thickness
  • 15 Green Teeth with 3 Edges Per Tooth
  • ReplacementTeeth: H3000 High Speed

DPH735

  • 85 Hp Maximum Engine
  • 75 Hp Maximum PTO
  • CAT 2 3-point hitch
  • Quick Hitch Compatible: No
  • Fixed Horizontal Blade
  • 540 Drive Shaft Slip clutch Gearbox protection
  • 35″ Blade Diameter (12″ Max Cut)
  • Steel Blade Material
  • 1-5/8″ Cut Thickness
  • 12 Beaver Teeth with 4 Edges Per Tooth
  • Replacement Teeth: B8000 Beaver Teeth

SKID STEER-MOUNTED TREE SAWS

DSM530

  • 180° Manual Rotation
  • Universal Skid Steer Connection
  • Doesn’t require 12 V Electric
  • 10 to 40 gpm motor
  • Hydraulic Hoses Included
  • Hydraulic Couplers NOT Included
  • 30″ Blade Diameter (10″ Max Cut)
  • AR400 Steel Blade
  • 3/4″ Cut Thickness
  • 12 Round Teeth with 3 Edges Per Tooth
  • Replacement Teeth: H3000 High Speed

DSA530

  • 180° Actuator Rotation
  • Universal Skid Steer Connection
  • 10 to 40 gpm motor
  • Requires 1 Positive Pin AUX or 12 V Electric 
  • Hydraulic Hoses Included
  • Hydraulic Couplers NOT Included
  • 30″ Blade Diameter (10″ Max Cut)
  • AR400 Steel Blade
  • 3/4″ Cut Thickness
  • 12 Round Teeth with 3 Edges Per Tooth
  • Replacement Teeth: H3000 High Speed

SKID STEER-MOUNTED TREE SHEARS

ISR512

  • Rotating blade angle
  • Carrier Weight – 5-8,000 lbs.
  • 12″ Diameter Capacity
  • Grabber: NO
  • 15-60 GPM Required

ISH510G

  • Fixed Horizontal Blade
  • Carrier Weight – 4-7,000 lbs.
  • 10″ Diameter Capacity
  • Grabber: YES
  • 10-50 GPM Required

ISH512G

  • Fixed Horizontal Blade
  • Carrier Weight 5-8,000 lbs.
  • 12″ Diameter Capacity
  • Grabber: YES
  • 15-60 GPM Required

ISH712G

  • Fixed Horizontal Blade
  • Carrier Weight 6-12,000 lbs.
  • 12″ Diameter Capacity
  • Grabber: YES
  • 15-60 GPM Required

SKID STEER-MOUNTED TREE PULLER

MODEL

CARRIER

LIMB SIZE

CYLINDER SIZE

PIN DIAMETER

SKID STEER SIZE

ISH3P

SKID STEER

4-INCH

3-INCH BORE

1.5 INCH

4-8,000 LBS.

TREE SPADES

TRACTOR-MOUNTED TREE SPADES

FIVE(5) SIZES 24"-40" ROOT BALL

PT324

  • 20″ Opening width 2″ Tree 
  • 1.5″ Tree size (Hardwood)
  • 24″ Root ball diameter
  • 23″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 1/4″ Mild steel blades
  • Steel slides 
  • Semi blade truncation
  • 1,100 lbs unit weight
  • 1,400 lbs weight with root ball
  • Minimum Carrier Weight 3,000 lbs.

PT330

  • 23″ Opening width 3″ Tree 
  • 2.5″Tree size (Hardwood)
  • 30″ Root ball diameter
  • 29″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 3/8″ Mild steel blades
  • Steel slides
  • Semi blade truncation
  • 1,356 lbs unit weight
  • 1,865 lbs weight with root ball
  • Minimum Carrier Weight 4,000 lbs.

PT440

  • 52″ Opening width 4″ Tree 
  • 3″ Tree size (Hardwood)
  • 40″ Root ball diameter
  • 30″ Root ball depth
  • 25° Blade angle
  • 4 blades
  • 1/4″  AR400 blades
  • Steel slides
  • Full blade truncation
  • Towers Swing Hinge
  • 1,934 lbs unit weight
  • 3,134 lbs wt.with root ball
  • Minimum Carrier Weight 6,000 lbs

PT650

  • 47″ Opening width 3″ Tree 
  • 2.5″Tree size (Hardwood)
  • 30″ Root ball diameter
  • 29″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 1/4″  AR400 blades,
  • Steel slides
  • Semi blade truncation
  • Towers Swing Hinge
  • 3,238 lbs unit weight
  • 5,785 lbs wt.with root ball
  • Minimum Carrier Weight
    10,000 lbs min

PS330

  • 60″ Opening width 3″ Tree 
  • 2.5″ Tree size (Hardwood)
  • 30″ Root ball diameter
  • 29″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 3/8″ Mild steel blades
  • Steel slides
  • Semi blade truncation
  • Towers Swing Hinge
  •  1,550 lbs unit weight
  • 2,050 lbs wt.with root ball
  •  Minimum Carrier Weight
    3,000 lbs min

SKID STEER-MOUNTED TREE SPADES

FIVE(5) SIZES 24"-40" ROOT BALL

ST324

  • 20″ Opening width 2″ Tree 
  • 1.5″ Tree size (Hardwood)
  • 24″ Root ball diameter
  • 23″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 1/4″ Mild steel blades
  • Steel slides 
  • Semi blade truncation
  • 1,100 lbs unit weight
  • 1,400 lbs weight with root ball
  • Minimum Carrier Weight 3,000 lbs.

ST330

  • 23″ Opening width 3″ Tree 
  • 2.5″Tree size (Hardwood)
  • 30″ Root ball diameter
  • 29″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 3/8″ Mild steel blades
  • Steel slides
  • Semi blade truncation
  •  1,356 lbs unit weight
  • 1,865 lbs weight with root ball
  • Minimum Carrier Weight 4,000 lbs

ST440

  • 52″ Opening width 4″ Tree
  • 3″ Tree size (Hardwood)
  • 40″ Root ball diameter
  • 30″ Root ball depth
  • 25° Blade angle
  • 4 blades
  • 1/4″  AR400 blades
  • Steel slides
  • Full blade truncation
  • Towers Swing Hinge
  • 1,934 lbs unit weight
  • 3,134 lbs wt.with root ball
  • Minimum Carrier Weight 6,000 lbs.

ST650

  • 47″ Opening width 3″ Tree size 
  • 2.5″Tree size (Hardwood)
  • 30″ Root ball diameter
  • 29″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 1/4″ AR400 blades,
  • Steel slides
  • Semi blade truncation
  • Towers Swing Hinge
  • 3,238 lbs unit weight
  • 5,785 lbs weight with root ball
  • Minimum Carrier Weight
    10,000 lbs min

SS330

  • 60″ Opening width 3″ Tree size
  • 2.5″ Tree size (Hardwood)
  • 30″ Root ball diameter
  • 29″ Root ball depth
  • 25° Blade angle
  • 3 blades
  • 3/8″ Mild steel blades
  • Steel slides
  • Semi blade truncation
  • Towers Swing Hinge
  •  1,550 lbs unit weight
  • 2,050 lbs weight with root ball
  •  Minimum Carrier Weight
    3,000 lbs min

SKID STEER-MOUNTED TREE SPADES

34S

  • 3.5″ Tree size (Evergreen)
  • 3″ Tree size (Hardwood)
  • 34″ Root ball diameter
  • 23″ Root ball depth
  • 4 blades, 25° Blade angle
  • 5/16 T1 blades, Nylon slides
  • Full blade truncation
  • 5-25 gpm Hydraulic flow requirements
  • 2,000 min hydraulic psi
  • 1.47 Gallon Hydraulic Oil displacement
  • 1,650 lbs unit weight (2,100 lbs w/ root ball)
  • Electric Controls*

38S

  • 4″ Tree size (Evergreen)
  • 3.5″ Tree size (Hardwood)
  • 38″ Root ball diameter
  • 27″ Root ball depth
  • 4 blades, 25° Blade angle
  • 5/16 T1 blades, Nylon slides
  • Full blade truncation
  • 5-25 gpm Hydraulic flow requirements
  • 2,000 min hydraulic psi
  • 1.71 Gallon Hydraulic Oil displacement
  • 1,920 lbs unit weight (2,720 lbs w/ root ball)
  • Electric Controls*

44S

  • 4.5″Tree size (Evergreen)
  • 4″ Tree size (Hardwood) 
  • Root ball diameter
  • 31″ Root ball depth
  • 4 blades, 25° Blade angle
  • 5/16 T1 blades, Nylon slides
  • Full blade truncation
  • 5-25 gpm Hydraulic flow requirements 
  • 2,000 min hydraulic psi
  • 1.96 Gallon Hydraulic Oil displacement
  • 2,210 lbs unit weight (3,410 lbs w/ root ball)
  • Electric Controls*

48S

  • 5″ Tree size (Evergreen)
  • 4.5″ Tree size (Hardwood)
  • 48″ Root ball diameter
  • 38″ Root ball depth
  • 4 blades, 25° Blade angle
  • 5/16 T1 blades, Nylon slides
  • Full blade truncation
  • 5-25 gpm Hydraulic flow requirements 
  • 2,000 min hydraulic psi
  • 1.96 Gallon Hydraulic Oil displacement
  • 2,740 lbs weight (5,240 lbs w/ root ball)
  • Electric Controls*

50S

  • 5.5″ Tree size (Evergreen)
  • 5″ Tree size (Hardwood)
  • 50″ Root ball diameter
  • 44″ Root ball depth
  • 4 blades, 25° Blade angle
  • 5/16 T1 blades, Nylon slides
  • Semi blade truncation
  • 5-25 gpm Hydraulic flow requirements 
  • 2,000 min hydraulic psi
  • 2.94 Gallon Hydraulic Oil displacement
  • 3,220 lbs weight (5,705 lbs w/ root ball)
  • Electric Controls*

TRAILER-MOUNTED TREE SPADES

TR330

  • 60″ Opening width
  • 3″ Tree size (Evergreen)
  • 2.5″ Tree size (Hardwood)
  • 30″ Root ball diameter
  • 29″ Root ball depth
  • 3 25° Blade angle
  • 3/8″ Mild steel blade
  • Semi blade truncation
  • Towers Swing Hinge
  •  3,950 lbs unit weight
  • 4450 lbs weight with root ball 

TR440

  • 52″ Opening width
  • 4″ Tree size (Evergreen)
  • 3″ Tree size (Hardwood)
  • 40″ Root ball diameter
  • 30″ Root ball depth
  • 4 25° angle blades
  • 1/4″ AR400 steel blades
  • Full blade truncation
  • Towers Swing Hinge
  • 4,150 lbs unit weight
  • 4,986 lbs weight with root ball

TR650

  • 47″ Opening width 5″ Tree size (Evergreen)
  • 4″ Tree size (Hardwood)
  • 50″ Root ball diameter
  • 43″ Root ball depth
  • 6 25° angle blades
  • 1/4″ AR400 steel blades
  • Semi blade truncation
  • Towers Swing Hinge
  •  8,238 lbs unit weight
  • 10,785 lbs weight with root ball

M33-HOLT50S

  • 61/2’*12′ Size
  • 5.5″ Tree size (Evergreen) 4″
  • Tree size (Hardwood) 50″
  • Root ball diameter
  • 44″ Root ball depth
  • 4 25° angle blades
  • 5/16″ T1 blades, nylon slides
  • Semi blade truncation
  • 7,250 lbs unit weight
  • 9,735 lbs weight with root ball


SKID STEER-MOUNTED TRENCHERS

TN336

  • 36″Trencher Depth
  • 4″ to 6″ Trencher Width
  • 2-9/16″ solid hardened steel main shaft 
  • Hydraulic relief over torque protection 
  • Skid steer up to 3 ton
    850 lbs.
  • Skidsteer 20 GPM Max (10 GPM min)
  • Tractor 21 GPM Max (15 GPM min)

TN548

  • 48″Trencher Depth 
  • 6″ to 10″ Trencher Width
  • 2-9/16″ solid hardened steel main shaft
  • Hydraulic relief over torque protection
  • Skidsteer up to 4 ton
  • 1,250 lbs.
  • Skidsteer 25 GPM Max (12 GPM min)
  • Tractor 25 GPM Max (18 GPM min)

TN560

  • 60″Trencher Depth
  • 6″ to 10″ Trencher Width
  • 2-9/16″ solid hardened steel main shaft
  • Hydraulic relief over torque protection
  • Skid steer from 3.5 ton
  • 1,500 lbs.
  • Skid steer
  • 25 GPM Max (12 GPM min)
  • Tractor 25 GPM Max (22 GPM min)

TN760

  • TN760 60″Trencher Depth
  • 6″ to 1 0″ Trencher Width
  • Hex solid hardened steel main shaft
  • Hydraulic relief over torque protection
  • Skid steer from 4 ton
  • 1,800 lbs.
  • Skid steer 42 GPM Max (20 GPM min)
  • Tractor 42 GPM Max (28 GPM min)

3-POINT

Most Baumalight Trenchers can also be mounted to a tractor. The optional 3-point hitch tractor mount has a cylinder that provides angle and depth control. To use this 3PH adapter, your tractor must have a hydro-static drive and two hydraulic remotes. External control kit(S1050) is available for tractors with only one set of external hydraulic connections.

Check with us for details!